Quick Answer: How Do You Take Apart A Kohler Faucet?

How do you loosen a Kohler faucet handle?

Use a 3/32″ hex wrench to loosen the set screw located in the back of the lever handle.

Use a Philips screwdriver to remove the screw in the bonnet….Widespread Faucet Handle Removal:Hold the handle with one hand.

Remove any remaining components to expose the valve.

The valve can now be replaced or other repairs made.More items….

How do you remove an old Kohler bathroom faucet?

Remove the Handles for the Antique Bathroom FaucetUnscrew the screw in the center of the handle attaching the handle to the valve stem using a Philips screwdriver, taking care to protect all finish surfaces.Gently pull of the handle and any remaining components to expose the valve.Set all parts aside for reuse.The valve can now be replaced or other repairs made.More items…

How do you remove a screwless faucet handle?

With the water shut off from the shut-off valves remove the handles. To do this you must locate a screw that is usually hidden beneath a decorative cap. Gently pry the cap off with a metal nail-file or flathead screwdriver. With the screw exposed unscrew it and lift off the handle.

How do you replace a Kohler faucet?

Replace the Valve in a Two Handle FaucetTurn off the water to your faucet and remove the handle (Fig. … With the handle removed, the top of the valve will be visible (Fig. … Use an adjustable or fixed wrench, or a 5/8 inch deep socket wrench, to loosen the valve by turning it counterclockwise (Fig. … Remove the valve (Fig.More items…

How do I fix my Kohler Devonshire faucet?

How do I fix my Kohler Devonshire faucet?Hold the handle with one hand. Using your other hand, turn the skirt, the decorative flared piece below the handle, counterclockwise.Remove any remaining components to expose the valve. Set all parts aside for re-use.The valve can now be replaced or other repairs made.Reassemble handle parts in reverse order.

How do I remove a stuck Kohler faucet handle?

Hold the faucet lever. Grab and twist the skirt under the lever and twist clockwise (as looking down at the handle). If it’s tight, try using a rubber jar opener to loosen it. If really tight, use a strap wrench (I found one at Sears for under $6) to loosen.

How do I know if my faucet cartridge is bad?

Signs that a cartridge faucet needs repair are water dripping from the spout, difficulty in adjusting the water temperature, hot water entering cold water outlets like toilet supply lines and inadequately heated water at some faucets.

How do you remove the handle from a sink faucet?

If your faucet has a decorative cap, pry off the cap with a small flathead screwdriver, then remove the handle screw with a Phillips screwdriver. If your faucet has a setscrew, remove the setscrew with an Allen wrench. Pull straight up on the handle to remove it from the faucet body.

How do you take apart a Kohler single handle faucet?

Replace the Valve in a Single Handle FaucetTurn off the water to the faucet.Remove the plug button from the handle (Fig. … Loosen the screw underneath the plug button to remove the handle (Fig. … Unscrew the bonnet counterclockwise to expose the valve and the mounting nut; the bonnet should remove easily by hand (Fig.More items…

How do you take apart a Kohler faucet head?

Slip a flat-head screwdriver under this oval tab to pop it off and reveal the hex nut. Use an Allen wrench to remove that nut and the handle. Next, twist the neck counterclockwise to remove it from the handle. Use an adjustable wrench to remove the kitchen faucet nut holding the cartridge down.

Do Kohler faucets have a lifetime warranty?

Kohler Co. warrants its Faucets* manufactured after January 1, 1997, to be leak and drip free during normal residential use for as long as the original consumer purchaser owns his or her home.